Frameless Goblet Pivot Doors Are usually Totally Rolltop and also Stackable regarding Highest Accessibility

Frameless Glass Doors provide a virtually uninterrupted view, whether open or closed. They slide, pivot and stack in the same style to bi folding doors, so that they are, generally speaking, fully retractable but, unlike bifolds, frameless glass doors have no hinges keeping the panels joined together.

Depending on their purpose and location, frameless glass slide and pivot doors can be found in single or double glazed options for internal or external applications. Only the double glazed version will meet all building regulations including U-values and weather proofing.

Single glazed frameless glass doors, comprising a toughened tempered glass panel, do not meet building regulations for use as patio doors and can’t be guaranteed a hundred per cent weatherproof but they’re the greatest in room dividers for maximum light flow and minimised audio flow. They are also ideal for external use, such as balcony enclosures, conservatory doors and on outbuildings.

Double glazed slide-pivot doors are made up of a hermetically sealed unit that, typically, comes with an opaque seal of approximately 20mm round the glass panel. pivot doors Technically frameless yet nearly yielding an uninterrupted view.  However, when compared with even the slimmest of bi-folding door frames (approximately 60mm), the consequence is an amazingly open view, even though fully closed contrary to the elements.

The thermal qualities of frameless double-glazed patio doors is as good, often better, than with framed doors. Timber, in particular, whilst an unhealthy conductor, is vunerable to swelling and shrinkage, ultimately causing draughty gaps.

The versatility of the slide and pivot frameless glass door system enables installation inside arches, around curves and around corners. Utilising a new form of retractable mechanism, a home pivots open (inwards or out) at one end of the doorway span, allowing the other doors to slide along the top and bottom rails, one by one, pivot and stack at right-angles to the access area.

Unlike the sliding-folding systems, the independent door system enables each panel to be positioned over the rail, allowing ventilation without full access. Alternatively, panels may be slid, pivoted and stacked back onto each side of the aperture for a symmetrical distribution of the panels.

Small apertures may have a set of frameless glass pivot doors fitted but larger openings will benefit by the capacity to slide doors away from the main access area. Theoretically, the width that may be accommodated is limitless. Much like all sliding door systems, professional installation is recommended.